Product Center

D/E Neutralizing Agar Isolator Pack environmental sampling plates are used for microbial load testing. The Isolator Pack plates are particularly useful for monitoring surfaces and air in Isolator Systems, clean rooms, and other environmentally-controlled areas when sterility of the medium is of importance.

RODAC environmental sampling plates are specially constructed so that an agar medium can be over-filled, producing a meniscus or dome-shaped surface that can be pressed onto a surface for sampling its microbial burden. These plates are used in a variety of programs to establish and monitor cleaning techniques and schedules.^1-5

After touching the surface to be sampled with the medium, the dish is covered and incubated at an appropriate temperature. The presence and number of microorganisms is determined by the appearance of colonies on the surface of the agar medium.⁶

The 100 x 15 mm style plates can be used for active and passive air sampling. They are also designed for personnel monitoring of finger tips.

Collection of samples from the same area before and after cleaning and treatment with a disinfectant permits the evaluation of the efficacy of sanitary procedures.

The multi-wrap design has been validated to protect the medium from vapor hydrogen peroxide when used in an Isolator System.

1. Examine plates for signs of deterioration as described under "Product Deterioration."

2. Check performance by inoculating a representative sample of plates with pure cultures of stable control organisms that give known, desired reactions. The following test strains are recommended:

For Laboratory Use.

Observe aseptic techniques and established precautions against microbiological hazards throughout all procedures. After use, prepared plates and other contaminated materials should be sterilized by autoclaving.