Pyxis™ CathRack System
Secure cath lab inventory management
The Pyxis™ CathRack system from BD manages supplies used in cardiac catheterization and interventional radiology labs, such as pacemakers, implantable cardioverter defibrillator (ICD), stents, vascular grafts, catheters and guide wires. This compact and high-density storage device helps increase security, accountability and standardization of your supply use. Your staff can expect easy access to supplies, a reduction of inventory outages, improved case costing and, if required, the ability to charge and supply usage in real-time directly to the patient billing system. Reporting capabilities offer information regarding patients, physicians, procedures, supply usage trends, supply par levels and replenishment.
- Provides a flexible platform that can be augmented with open access offerings to enable a blend of secure and open inventory management.
- Interfaces with a hospital's registry, materials management system and, if required, patient billing, for real-time, automatic and accurate data at the point of use.
- Helps ensure visibility to supply chain performance by increasing data accuracy and providing optional analytic tools.
The information contained herein should be used for general planning only. Please confirm specifications with your BD representative.
Station Specifications | |||||
---|---|---|---|---|---|
Equipment | Configuration | Dimensions* Inches (cm) H x W x D | Weight (empty) Lb (Kg) | Operating Power | BTU/hr** |
Pyxis CathRack | Double column main | 79.5 x 52 x 28 (201.9 x 132.1 x 71.2) |
920 (420) | 100-240V, 3A 50-60Hz | 522 |
Pyxis CathRack | Single column auxiliary | 79.5 x 31 x 28 (201.9 x 78.8 x 71.2) |
685 (310) | 100-240V, 3A 50-60Hz | 490 |
Pyxis CathRack (1 Module) | Double column auxiliary | 79.5 x 52 x 28 (201.9 x 132.1 x 71.2) |
776 (355) | 100-240V, 3A 50-60Hz | 522 |
Pyxis CathRack (2 Modules) | Double column auxiliary | 79.5 x 52 x 28 (201.9 x 132.1 x 71.2) |
1013 (460) | 100-240V, 3A 50-60Hz | 522 |
*Stations require additional 3" in height and 4-6" in back (depth) for ventilation; 35" in front for swinging doors.
**Power consumption is based on maximum operation with average line voltage.
General Specifications | |||||
---|---|---|---|---|---|
Processor/Memory | Currently Pentium II 433, 64 MB RAM | ||||
Manual Release | Single lever (beneath keyed top flap) | ||||
Additional Security Options | Two locks to secure the top flap/rear panel, lock loop system available. Seismic anchoring available. | ||||
Software Information | Pyxis proprietary Pyxis SupplyStation automated inventory management system software | ||||
Operating System | Windows® NT Workstation 4.0 w/Service Pack 6a | ||||
Database Engine | Sybase SQL Anywhere 6.0.3 | ||||
Communication | Serial (RS), modem, and network (TCP/IP over Ethernet)--one crop/line required per main unit | ||||
Input Circuit Protection | Resettable circuit breaker(s) on the side of the power switch panel that is located at the top of the unit for all SupplyStations and CathRack units | ||||
Signal Connection | Inter-system: dual RJ11 & RS-485. proprietary protocol. Not to be connected to telephone circuits | ||||
Ventilation | Fan cooled | ||||
Mode of Operation | Continuous | ||||
Power Connections | IEC320 10A Male receptacle. Panel mount on upper rear center column for SupplyStations and CathRack | ||||
Storage and Operating Environment | Temperature: 15-35 degrees C Atmospheric Pressure Range: 700-1060 hPa Relative Humidity: 30-75%, Non-condensing |
||||
Contaminants/ Pollution | Suitable for operation in a Pollution Degree 2 environment | ||||
All Units | Latex-free (Lexan/polypropylene construction) |
Related products
Please note, not all products, services or features of products and services may be available in your local area. Please check with your local BD representative.