StatLock™ IV Select Stabilization Device

The StatLock™ IV Select Stabilization Device is the ultimate, state-of-the-art stabilization device.

Carousel Image
Loading
tabs dropdown arrow
Overview
  • Universally compatible with all peripheral IV catheters – available in adult and pediatric sizes.
  • Quickest and easiest of all StatLock™ IV Stabilization Devices.
  • Unique entry angle of retainer is designed to prevent catheter kinking which could lead to occlusion.
  • Includes patented luer-lock extension set – just snap the retainer over the custom-crafted luer, peel and place.
  • Breathable anchor pad made from nonabsorbent tricot polyester.
  • Sterile, DEHP-free and latex-free.
  • The StatLock™ IV Select Stabilization Device is now available for low-pressure power injection for patients needing a contrast study.

 

true
Features and Benefits
StatLock™ Stabilization Devices are a more effective alternative to tape in helping improve clinical outcomes, quality of care and economic efficiencies. The StatLock™ IV Select Stabilization Device snap fits onto the proprietary extension set behind the luer. Available along with an array of valve systems. Available in adult and pediatric sizes.
Reference
false
Products & Accessories
  • product-image

    StatLock™ IV Select Stabilization Device Kit, Macro Extension Set, 6 in Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device, Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device, 6 in Macro Extension Set

  • product-image

    StatLock™ IV Select Stabilization Device Kit, 6 in Micro Extension Set, Ultrasite®, Frepp® (Frepp is a registered trademark of Enturia, Inc.)

  • product-image

    StatLock™ IV Select Stabilization Device, 6 in Micro Extension Set, SmartSite™ Y-Valve and SmartSite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device Small Bore Bifurcated, 9 in

  • product-image

    StatLock™ IV Select Stabilization Device Macro Bore 7 in Bifurcated 2 SmartSite™ Plus Valve

  • product-image

    StatLock™ IV Select Stabilization Device, 6 in Micro Extension Set, SmartSite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device Kit, Macro, SmartSite™ Valve, Y set with Gloves

  • product-image

    StatLock™ IV Select Stabilization Device Start Kit, Macro 6 in, Frepp®

  • product-image

    StatLock™ IV Select Stabilization Device, Macro 7 in Bifurcated, 2 Ultrasite® Valve

  • product-image

    StatLock™ IV Select Stabilization Device Start Kit, Macro 6 in

  • product-image

    StatLock™ IV Select Stabilization Device Kit, Micro, SmartSite™ Valve, Frepp with Gloves

  • product-image

    StatLock™ IV Select Stabilization Device Kit, 6 in Macro Extension Set, SmartSite™ Valve, Frepp®

  • product-image

    StatLock™ IV Select Micro Start Kit 50 box

  • product-image

    StatLock™ IV Select Stabilization Device Micro, with Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device, Macro Pressure No Valve

  • product-image

    StatLock™ IV Select Stabilization Device, Macro Clave

  • product-image

    StatLock™ IV Select Stabilization Device, 6 in Macro Extension Set, SmartSite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device Kit, Pediatric, 6 in Micro Extension Set, SmartSite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device Kit, Macro Extension Set, 6 in Clave

  • product-image

    StatLock™ IV Select Stabilization Device No Set

  • product-image

    StatLock™ IV Select Stabilization Device, Macro, 9 in Bifurcated, 1 Ultrasite® Valve

  • product-image

    StatLock™ IV Select Stabilization Device Kit, 6 in Macro Extension Set, Ultrasite®, Frepp® (Frepp is a registered trademark of Enturia, Inc.)

  • product-image

    StatLock™ IV Select Stabilization Device Kit, 6 in Micro Extension Set, SmartSite™ Valve, Frepp®

  • product-image

    StatLock™ IV Select Stabilization Device Macro, with Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device Kit, 6 in Micro Extension Set, SmartSite™, Sepp®

  • product-image

    StatLock™ IV Select Stabilization Device Macro pressure tub ing with Ultrasite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device, Micro Extension Set, Ultrasite® Valve

  • product-image

    StatLock™ IV Select Stabilization Device, Micro Clave, Pediatric

  • product-image

    StatLock™ IV Select Stabilization Device, Macro Extension Set, Ultrasite® Valve

  • product-image

    StatLock™ IV Select Stabilization Device Kit, Macro Extension Set, 7 in Bifurcated, Ultrasite

  • product-image

    StatLock™ IV Select Stabilization Device, 9 in Bifurcated Micro Extension Set, SmartSite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device Small Bore, 12 in

  • product-image

    StatLock™ IV Select Stabilization Device, Macro Pressure, SmartSite™ Valve

  • product-image

    StatLock™ IV Select Stabilization Device Macro, 7 in Bifurcated, 2 Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device Start Kit, Macro 6 in SmartSite, Frepp®

  • product-image

    StatLock™ IV Select Stabilization Device Kit, 6 in Macro Extension Set, SmartSite™ Valve, Sepp®

  • product-image

    StatLock™ IV Select Stabilization Device Micro, Micro Clave, Pediatric

  • product-image

    StatLock™ IV Select Stabilization Device Kit, Micro Extension Set, 6 in Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device Micro, Bifurcated 2 Micro Clave

  • product-image

    StatLock™ IV Select Stabilization Device, 6 in Micro Extension Set

References
false
Resources
References
false
Frequently Asked Questions

Nearly.The StatLock stabilization device is contraindicated in patients with known allergies to adhesives or tapes.

While the StatLock stabilization device is probably appropriate for more than 99% of your patients; some people have skin that simply will not accept an adhesive-based product – their skin is too flaky, too greasy, or too diaphoretic. Use clinical judgment. Just know that where you can use StatLock stabilization device, your clinical and cost outcomes will be dramatically improved.

You do need to extend your insertion site alcohol prep or chlorhexidine prep widely to both sides to cover the securement site. This is a necessary step to cleanse the skin before the StatLock stabilization device application.

BD recommends the use of the skin prep pad included with the StatLock stabilization device. The skin prep provides an acrylic layer that protects the skin and enhances adherence of the anchor pad. Performing both of these steps will maximize product performance.

When you use the skin prep you'll need to allow it to dry for 10 to 15 seconds and make certain it is dry, meaning smooth to the touch – not tacky. Use your clinical judgment based on assessment of the patient's skin. Just remember, when skin prep is not used the StatLock stabilization devices may prematurely lift.

Yes.

  • Always orient the push-tab straight up.
  • Always connect the StatLock stabilization retainer device to the PIV before placing the StatLock stabilization device onto skin.
  • The blue StatLock stabilization device retainer clip is like an upside-down "V". Therefore, do not inadvertently squeeze it closed by compressing both sides. Instead, just hold one side and snap it over the hub of the catheter.

You can use them to:

  • Stabilize the catheter while prepping and securing with the StatLock stabilization device by applying the foam strips over the catheter hub
  • Fashion a J-loop with the IV tubing
  • Form a cushion under your luer lock spin nut
  • For extension sets without luer locks, wrap them around the catheter and the extension set connection for added security
  • Reinforce the StatLock stabilization devices. They are sterile, tape is not.
  • If you had a tape-secured PIV, then you would have to remove the tape to change the tubing.

    StatLock IV Ultra stabilization device

    With the StatLock IV Ultra stabilization device you can keep the stabilization device in place while you change tubing. Simply steady the retainer with the thumb and index finger of one hand while unscrewing the extension set. Remove the set. Then, while continuing to brace the retainer, press-fit and screw in your replacement extension set.

    StatLock IV Select stabilization device

    For StatLock IV Select stabilization device, you will need to replace the StatLock stabilization devices when you remove and replace the tubing – just as you would with tape securement; but this is a rare event offset by StatLock stabilization device advantages.

    <p>Nearly.The StatLock stabilization device is contraindicated in patients with known allergies to adhesives or tapes.</p> <p>While the StatLock stabilization device is probably appropriate for more than 99% of your patients; some people have skin that simply will not accept an adhesive-based product – their skin is too flaky, too greasy, or too diaphoretic. Use clinical judgment. Just know that where you can use StatLock stabilization device, your clinical and cost outcomes will be dramatically improved.</p>

    <p>You do need to extend your insertion site alcohol prep or chlorhexidine prep widely to both sides to cover the securement site. This is a necessary step to cleanse the skin before the StatLock stabilization device application.</p> <p>BD recommends the use of the skin prep pad included with the StatLock stabilization device. The skin prep provides an acrylic layer that protects the skin and enhances adherence of the anchor pad. Performing both of these steps will maximize product performance.</p> <p>When you use the skin prep you'll need to allow it to dry for 10 to 15 seconds and make certain it is dry, meaning smooth to the touch – not tacky. Use your clinical judgment based on assessment of the patient's skin. Just remember, when skin prep is not used the StatLock stabilization devices may prematurely lift.</p>

    <p>Yes.</p> <li>Always orient the push-tab straight up.</li> <li>Always connect the StatLock stabilization retainer device to the PIV before placing the StatLock stabilization device onto skin.</li> <li>The blue StatLock stabilization device retainer clip is like an upside-down "V". Therefore, do not inadvertently squeeze it closed by compressing both sides. Instead, just hold one side and snap it over the hub of the catheter.</li>

    <p>You can use them to:</p> <li>Stabilize the catheter while prepping and securing with the StatLock stabilization device by applying the foam strips over the catheter hub</li> <li>Fashion a J-loop with the IV tubing</li> <li>Form a cushion under your luer lock spin nut</li> <li>For extension sets without luer locks, wrap them around the catheter and the extension set connection for added security</li> <li>Reinforce the StatLock stabilization devices. They are sterile, tape is not.</li>

    <p>If you had a tape-secured PIV, then you would have to remove the tape to change the tubing.</p> <p><strong>StatLock IV Ultra stabilization device</strong></p> <p>With the StatLock IV Ultra stabilization device you can keep the stabilization device in place while you change tubing. Simply steady the retainer with the thumb and index finger of one hand while unscrewing the extension set. Remove the set. Then, while continuing to brace the retainer, press-fit and screw in your replacement extension set.</p> <p><strong>StatLock IV Select stabilization device</strong></p> <p>For StatLock IV Select stabilization device, you will need to replace the StatLock stabilization devices when you remove and replace the tubing – just as you would with tape securement; but this is a rare event offset by StatLock stabilization device advantages.</p>

    true

    BD-19926

    Chat with us
    Our live chat is available between the hours of 8.30am - 5.00pm EST, Monday - Friday
    ×